Denso AT21B-SM Manual de usuario descargar pdf (Pagina 31)

7.2.1.2 Extracting data blocks

If data read is in the comma-delimited CSV format, the scanner extracts data blocks specified by the data block

numbers from a code specified by the “Code type” and then outputs it in the data transmission format selected in

the scanner (see Chapter 9, Section 9.4). The extraction conditions and data bock numbers are listed below.

 Extraction conditions

Extraction conditions Setting data

Any code

UPC-A/EAN-13

UPC-E

EAN-8

CODE128

GS1-128 (EAN-128)

CODABAR (NW-7)

CODE39

Interleaved 2 of 5(ITF)

Standard 2 of 5(STF)

CODE32

CODE93

MSI

Plessey

“Code type”

GS1 DataBar (RSS)

“Transmit data regardless of the results” Permit / Prohibit

If the scanner fails to extract a data block or scans a code not specified by “Code type” when the “Transmit data

regardless of the results” is permitted, then it outputs the data read as is without editing.

 Data block numbers

Each data block number should be within the range from 1 through 99. Up to three blocks can be extracted.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 108 109

Sin comentarios

Denso AT21B-SM Manual de usuario Pagina 31