Denso BHT-825QW Manual de usuario

2D Code Handy Terminal BHT-825QW/BHT-825QB BHT-825Q User’s Manual

ix BHT-825Q series Handling the CU • If smoke, abnormal odors or noises come from the CU, immediately unplug the AC adapter from the wall socket or

85 2D Code Handy Terminal“1：MIN”： Set minimum number of digits of Code 93 Setting range： 1～99 “2：MAX”： Set maximum number of digits of Code 93

86 BHT-825Q series 4. Press the ENT key or BS/C key for the settings value to be valid and then return to the SET BARCODE screen. “7:RSS”：Detailed

87 2D Code Handy Terminal 2. Use the cursor keys ([▲] [▼]) or numerical keys ([1] [2] [3] [4] [5] [6] [7]) to select the item to be set. 3. Use the

88 BHT-825Q series  “2:2D CODE”：2D Code Select “2:2D CODE” and press ENT key at SET READ CODE to display SET 2D CODE screen, allowing the code to b

89 2D Code Handy Terminal“1:QRCODE”：Detailed settings for QR Code 1. Select “1:QRCODE” at SET 2D CODE menu and then press the ENT key. SET QRCODE

90 BHT-825Q series （QR Code model1 setting） “3：READING”： Enable/disable QR Code model 1 “4：MIN”： Set the minimum code version of QR Code model 1.

91 2D Code Handy Terminal 2. Use the cursor keys ([▲] [▼]) or numerical keys ([1] [2] [3] [4] [5] [6] [7] [8]) to select the item to be set. 3. U

92 BHT-825Q series （Square iQR Code setting） “3：READING”： Enable/disable Square iQR Code “4：MIN”： Set the minimum code version of Square iQR Code.

93 2D Code Handy Terminal“3：MAX”： Set the maximum code version of square Data Matrix Code. Setting range： 1～24 （Recatangular Data Matrix setting） “

94 BHT-825Q series  “3:MULTI-LINE”：Multi-line code 1. Select “3:MULTI-LINE” at SET READ CODE menu and then press the ENT key. SET MULTI-LINE scree

x 2D Code Handy Terminal To System Designers: • When introducing BHTs in those systems that could affect human lives (e.g., medicines management sy

95 2D Code Handy TerminalIf “0～9” is allocated at the menu, limitation can be set to read only when allocated numeric characters matchs to the first

96 BHT-825Q series “UPC-E”：Detailed settings of UPC-E for the Multiline code 1. Select “UPC-E” at SET MULTI-LINE menu and then press the ENT key. SE

97 2D Code Handy Terminal━ Point ━ z Set the value of minimum number of digits to less than that of maximum number of digits. If the value of min

98 BHT-825Q series “5：CD CHECK”： “ON” ：It reads only when check digits are correct. It doesn’t read when check digits are not corrct or no check dig

99 2D Code Handy Terminal 4. Press the ENT key or BS/C key for the settings value to be valid and then return to the SET MULTI-LINE screen. “CODE93

100 BHT-825Q series “CODE128”：Detailed settings of Code 128 for the Multiline code 1. Select “CODE128” at SET MULTI-LINE menu and then press the EN

101 2D Code Handy Terminal [5] Setting the communication environment The communication environment settings following system initialization are foll

102 BHT-825Q series “1: PARAMETER”: Setting the communication parameters Select “1: PARAMETER” to display the screen shown on the right. The highlig

103 2D Code Handy Terminal  “2: PROTOCAL TYPE”: Setting the communication protocol type 1. Select “2: PROTOCOL TYPE” at the SET COMMUNICATION menu

104 BHT-825Q series Select “1: Ymodem” at the PROTOCOL TYPE menu to display the screen on the right. The highlighted settings will be the current set

xi BHT-825Q series • If the BHT has been stored in a hot (50°C to 60°C, 122°F to 140°F) and humid place, allow it to sit at room temperature and hum

105 2D Code Handy TerminalSelect “3: BHT-Ir Protocol” at the PROTOCOL TYPE menu to display the screen on the right. Enter the ID number of the BHT u

106 BHT-825Q series [6] Defining the functions of the Shift key and Magic keys Use the following procedure to change the key settings. 1. Select “6

107 2D Code Handy Terminal “2: M1 KEY” - ”5: M4 KEY”: Defining the Mx key functions 1. Select “2: M1 KEY” to “5: M4 KEY” at the SET KEY menu and th

108 BHT-825Q series  Defining the backspace/clear key (BS/C key) function The BS/C key deletes the last entered character (backspace), and when pre

109 2D Code Handy Terminal[7] Setting the TCP/IP, FTP and DHCP Use the following procedure to change the TCP/IP, FTP and DHCP settings. 1. Select “

110 BHT-825Q series “2: IP ADDRESS”: Setting the IP address Select “2: IP ADDRESS” at the SET TCP/IP menu to display the screen on the right where th

111 2D Code Handy Terminal Setting the FTP 1. Select “2: SET FTP” at the SET TCP/IP menu and then press the ENT key. The SET FTP menu screen on the

112 BHT-825Q series “2: OPTION”: Setting the FTP options Select “2: OPTION” at the SET FTP menu to display the screen on the right where the current

113 2D Code Handy Terminal Setting the DHCP 1. Select “3: DHCP” at the SET TCP/IP menu and then press the ENT key. The SET DHCP screen on the right

114 BHT-825Q series [8] Setting the resume function Use the following procedure to set the resume function. 1. Select “1: RESUME” from the SET SYS

xii 2D Code Handy Terminal Handling the CU • Never disassemble or modify the CU; doing so could result in an accident such as fire or malfunction.

115 2D Code Handy Terminal[BLOCK ERASE ICON] 1. Select “2: DRIVE TOOL” from the SET SYSTEM Menu 2/2 and then press the ENT key to display the screen

116 BHT-825Q series [11] Setting the operation log The BHT-800 series is compliant with the BHT Manager software (host-side tool). The OPERATION LOG

117 2D Code Handy Terminal4.5.7 BHT Operation Test (TEST Menu) Use the following procedure to perform a BHT operation test. 1. Select “5: TEST” at t

118 BHT-825Q series [1] Code scanning test Use the following procedure to perform a barcode scanning test. 1. Select “1: QRCODE” at the TEST menu a

119 2D Code Handy TerminalCode Type and Corresponding Characters Didplayed on the Screen Displayed characters Code type Code mark Type1 Code mark Typ

120 BHT-825Q series *1: The codes with more than 4 digits are read for ITF. *2: CODE MARK Type 2 is the Code Mark system that is compliant with “

121 2D Code Handy Terminal  Setting the Code Scanning Test Options When performing the code scanning test, press the F1 key to display the screen on

122 BHT-825Q series [2] Memory test Use the following procedure to perform a memory test. 1. Select “2: MEMORY” at the TEST menu and then press th

123 2D Code Handy Terminal[3] Scale test Use the following procedure to perform a scale test. 1. Select “3: BEEPER” at the TEST menu and then press

124 BHT-825Q series [5] LCD and indicator LED tests Use the following procedure to perform an LCD and indicator LED test. 1. Select “5: LCD” at the

xiii BHT-825Q series Declaration of Conformity For European Union English: Hereby, DENSO WAVE INCORPORATED, declares that this BHT-825QB/QW/QWB conta

125 2D Code Handy Terminal4. Press the ENT key. The entire screen turns a lighter shade of gray. Press the BS/C key to return to the previous scree

126 BHT-825Q series 7. Press the ENT key. The entire screen turns red, and at the same time, the indicator LED turns red. Press the BS/C key to ret

127 2D Code Handy Terminal10. Press the ENT key. A 1-dot thick frame displays around the screen. Press the BS/C key to return to the previous scree

128 BHT-825Q series [6] File test The file test allows detailed information on program files, data files, audio files (*.WAV), and image files(*.JPG

129 2D Code Handy Terminal◆ Media files (*.WAV) 1. Use the cursor keys ([▲] [▼]) to select a *.WAV file, and then press the ENT key. The screen to

130 BHT-825Q series ◆ Media files (*.JPG) 1. Use the cursor keys ([▲] [▼]) to select a *.JPG file, and then press the ENT key. The screen to the r

131 2D Code Handy Terminal◆ Font files (*.FN3/FN4) 1. Use the cursor keys ([▲] [▼]) to select a *.FNT file, and then press the ENT key. Press the

132 BHT-825Q series ◆ Other files (*.DAT, *.TXT, etc.) 1. Use the cursor keys ([▲] [▼]) to select a file, and then press the ENT key. If field inf

133 2D Code Handy Terminal[7] Communication test Use the following procedure to perform a communication test. 1. Select “7: COMMUNICATION” at the T

134 BHT-825Q series 3. At the slave BHT to be tested, select “1: SLAVE”, and at the master BHT, select “2: MASTER”. Then press the ENT key. The scre

xiv 2D Code Handy Terminal Português: DENSO WAVE INCORPORATED declara que este BHT-825QB/QW/QWB inclui um Módulo LAN sem fios (tipo: DWWL002) / uma P

135 2D Code Handy Terminal[8] Key-entry, speaker and vibrator test Use the following procedure to perform a key entry, speaker and vibrator test. 1.

136 BHT-825Q series [9] PING test Use the following procedure to perform a PING test. 1. Select “9: PING” at the TEST menu and then press the ENT k

137 2D Code Handy TerminalUpon completion of the PING test, the screen on the right displays. The PING result may include the following: OK: Displ

138 BHT-825Q series  “2: SET PING” (PING Options Setting Screen) 1. Select “2: SET PING” at the TEST PING menu and then press the ENT key. The curr

139 2D Code Handy TerminalPING Echo Request Transmission Timing (SEND TYPE) Two types of echo request send timings are available: TYPE 1 and TYPE 2.

140 BHT-825Q series  “3: SET DEVICE” (PING Device Setting Screen) 3. Select “3: SET DEVICE” at the TEST PING menu and then press the ENT key. The

141 2D Code Handy Terminal4.5.8 System Information (SYSTEM INFORMATION Menu) [1] Displaying the BHT system information Use the following procedure t

142 BHT-825Q series [1] Functions for which licenses have been registered (∗) 1. Use the cursor keys ([▲] [▼]) to highlight the name of a function

143 2D Code Handy Terminal[2] CU-811 System Information Display Use the following procedure to display CU-811 system information. 1. Place the BHT

144 BHT-825Q series 4.5.9 Downloading/Uploading Files by FTP (FTP MENU) Use the following procedure to download and upload files by FTP. 1. Select “

0001.1 System Configuration··················································································7772 1111.1.1 Hard

145 2D Code Handy Terminal 2. Use the cursor keys ([▲] [▼]) to highlight the item to be set, and then press the ENT key. The mode changes to entry m

146 BHT-825Q series [2] Uploading by FTP 1. Select “2: UPLOAD” at the FTP MENU and then press the ENT key. The screen on the right displays if up

147 2D Code Handy Terminal 3. Enter the directory and file name, or select a file, and then press the ENT key. Press the BS/C key to return to the F

148 BHT-825Q series FTP Download/Upload Messages When the BHT is uploading or downloading files by FTP, the following messages will appear at the bot

149 2D Code Handy TerminalResponse Messages from the FTP server The messages that FTP servers send during and after FTP operations vary, but servers

150 BHT-825Q series 4.5.10 Wireless Communcation Settings (DEVICE MENU) Use the following procedure to set up wireless communication. 1. Select “8:

151 2D Code Handy Terminal Wireless Network Parameter Settings 1. Select “1: NETWORK PARAMETER” in the SET RF NETWORK menu and then press the ENT

152 BHT-825Q series  Wireless Security Settings 1. Select “2: SECURITY” in the SET RF PARAMETER menu and then press the ENT key. The screen on the

153 2D Code Handy Terminal Wireless Security None Mode WEP can be used with the Wireless security None mode. To enable WEP, WEP and WEP KEY setti

154 BHT-825Q series 4. Use the cursor keys ([▲] [▼]) or numerical keys ([2] [3] [4] [5]) to highlight a WEP KEY from 1 to 4, and then press the ENT

2 BHT-825Q series 1.1 System Configuration This section describes the hardware required for the code data collection system used by the BHT and the

155 2D Code Handy Terminal 8. Press the BS/C key to return to the SECURITY CONFIG menu. - Point - It is not possible to read a written WEP key, an

156 BHT-825Q series  Wireless Security 1x Supplicant Mode EAP authentication can be used with wireless security 1x Supplicant mode. 1. Select “2:

157 2D Code Handy Terminal 5. Use the numerical keys to enter an ID and press the ENT key. Press the SF and the BS/C key to change the entry mode (n

158 BHT-825Q series  Wireless Security WPA-1x Mode EAP authentication and an encryption system can be used with wireless security WPA-1x mode. 1.

159 2D Code Handy Terminal 5. Use the numerical keys to enter an ID and press the ENT key. Press the SF key to change the entry mode (numerical entr

160 BHT-825Q series 13. Use the cursor keys ([▲] [▼]) or numerical key ([2]) to highlight [2: WPA CIPHER] and then press the ENT key. The screen on

161 2D Code Handy Terminal 3. Ensure that [1: PRE SHARED KEY] is highlighted and then press the ENT key. The mode changes to entry mode and the curso

162 BHT-825Q series  Wireless Security WPA2-1x Mode EAP authentication and an encryption system can be used with wireless security WPA2-1x mode. 1.

163 2D Code Handy Terminal 7. Use the numerical keys to enter an ID and press the ENT key. Press the SF key to change the entry mode (numerical entr

164 BHT-825Q series  Wireless Security WPA2-PSK Mode PSK authentication and an encryption system can be used with wireless security WPA2-PSK mode.

3 2D Code Handy Terminal  Host Computer Allows you to edit, manage and download user programs and data, as well as downloading system programs. Mode

165 2D Code Handy Terminal Wireless Parameter Initialization 1. Select “3: INITIALIZE” at the SET RF PARAMETER menu and then press the ENT key. The

166 BHT-825Q series [2] Site Survey Menu 1. Select “2: SITE SURVEY” at the RF MENU and then press the ENT key. The SITE SURVEY screen on the rig

167 2D Code Handy TerminalUse the following procedure to set Bluetooth wireless communications. 1. Select “BLUETOOTH” in the DEVICE MENU and then

168 BHT-825Q series [2] Setting up the Bluetooth® parameter 1. Select “2: SET BLUETOOTH” in the BLUETOOTH MENU and then press the ENT key. The SET BL

169 2D Code Handy Terminal Setting up the device detection parameters 1. Select “2: INQUIRY” in the SET BLUETOOTH menu and then press the ENT key.

170 BHT-825Q series  Setting up the master station 1. Select “3: MASTER” in the SET BLUETOOTH menu and then press the ENT key. The current setting

171 2D Code Handy TerminalSetting up the serial port profile (SPP) service for the connection target 1. Press numeric key [7] and the SF key simulta

172 BHT-825Q series  Setting up the slave station 1. Select “4: SLAVE” in the SET BLUETOOTH menu and then press the ENT key. The current settings

173 2D Code Handy Terminal  Setting up the file transfer protocol options 1. Select “5: SPP PARAMETER” in the SET BLUETOOTH menu and then press th

174 BHT-825Q series [3] Detecting remote devices 1. Select “3: BROWSE DEVICE” in the BLUETOOTH MENU and then press the ENT key. The screen on the r

4 BHT-825Q series 1.1.2 Software Configuration This section describes the software used for BHT Series application development and application in add

175 2D Code Handy Terminal 5. Use the cursor keys ([▲] [▼]) or numeric key ([3]) to highlight the [3: NUM RESPONSES] and then press the ENT key. Ent

176 BHT-825Q series The confirmation screen on the right is displayed. To set the selected address as a remote device address, select “1: Yes” and

177 2D Code Handy Terminal  Searching for services 1. Select “2: BROWSE SERVICE” in the BROWSE DEVICE menu and then press the ENT key. The screen o

178 BHT-825Q series When the service inquiry is completed or the service inquiry time has elapsed, the Bluetooth® device address of the destination

179 2D Code Handy Terminal  Displaying the authenticated remote device addresses 1. Select “3: AUTH BD_ADDR” in the BROWSE DEVICE menu and then pr

180 BHT-825Q series [4] File transfer with serial port profile 1. Select “4: SERIAL PORT” in the BLUETOOTH MENU and then press the ENT key. The sc

181 2D Code Handy Terminal 7. Use the cursor keys ([▲] [▼]) or numeric key ([1]) to highlight the [1: DO IT] and then press the ENT key. A serial po

182 BHT-825Q series 4.5.11 Deleting Program/Data Files (DELEETE FILE Menu) Delete program files or data files stored in the FLASH ROM. Use the foll

183 2D Code Handy Terminal4.5.12 Deleting Font Files (DELETE FILE Menu) Delete font files stored in the FLASH ROM. If there is insufficient user area

184 BHT-825Q series To delete font files: Use the cursor keys ([▲] [▼]) or numerical key ([1]) to highlight [1: Yes] and then press the ENT key. The

i BHT-825Q series Preface Thank you for using the BHT-825Q/BHT-825QB/BHT-825QW DENSO WAVE 2D Code Handy Terminal. Please read this manual thoroughly

5 2D Code Handy Terminal [3] Software Used at the BHT Unit The BHT unit FLASH memory has a system area and user area, with the system program sto

185 2D Code Handy Terminal4.5.13 Downloading/Uploading the BHT System Parameter File (SYSTEM PARAMETER Menu) The system parameter file (file name: ”_

186 BHT-825Q series [1] Downloading the BHT system parameter file 1. Use the cursor keys ([▲] [▼]) or numerical key ([1]) to highlight [1: DOWNLOAD]

187 2D Code Handy Terminal[2] Uploading the BHT system parameter file 1. Use the cursor keys ([▲] [▼]) or numerical key ([2]) to highlight [2: UP

188 BHT-825Q series 4.5.14 Setting the Remote Wake-up (SET REMOTE WAKEUP Menu) Use the following procedure to perform remote wake-up settings. 1. Pr

189 2D Code Handy Terminal4.5.15 Downloading/Uploading the System Message File (SYSTEM MESSAGE Menu) The system message file is a file (file name: “_

190 BHT-825Q series [1] Downloading the system message file 1. Use the cursor keys ([▲] [▼]) or numerical key ([1]) to highlight [1: DOWNLOAD] and

191 2D Code Handy Terminal[2] Uploading the system message file 1. Use the cursor keys ([▲] [▼]) or numerical key ([2]) to highlight [2: UPLOAD] an

192 BHT-825Q series 4.5.16 Updating the System (MODIFY MENU) Use the following procedure to update the system. 1. Press the dot key while holding do

193 2D Code Handy Terminal♦ When the Displayed File Name Differs from the BHT System Update File If the name of the file displayed at [2: FILENAME]

194 BHT-825Q series [2] Updating the CU-811 system Update the CU-811 system after downloading the CU-811 system update file. (Refer to section ”4.2.

6 BHT-825Q series • System Mode This program is used to operate files, make system environment settings, and perform various types of tests. Refer to

195 2D Code Handy Terminal♦ If the System Update File Does not Exist when Updating the CU-811 System The screen on the right displays if the CU-811

196 BHT-825Q series

BHT-825Q series 5.1 Infrared Communication··········································································198 5.1.1

198 BHT-825Q series 5.1 Infrared Communication The BHT has a built-in infrared communication device that enables wireless transfer of programs and d

199 2D Code Handy Terminal 5.1.1 Infrared Communication Port Transmission Speed Communicating Device Transmission Speed BHT-800 Series 9600, 19200

200 BHT-825Q series 5.2 Wireless Communication The BHT-825Q series is equipped with a 2.4 GHz frequency band wireless module. 5.2.1 Usage Precaution

201 2D Code Handy Terminal 5.2.2 Setting Parameters Programs written in BHT-BASIC control wireless communication with commands between the BHT and ac

202 BHT-825Q series  EAP TYPE This is the EAP authentication method setting used for 802.1x authentication. Select PEAP or EAP-TLS. This is valid on

203 2D Code Handy Terminal 5.3 Bluetooth® Wireless Communication 5.3.1 Usage Precautions • It may be possible to avoid the easy occurrence of comm

204 BHT-825Q series 5.3.2 Setting Parameters  Bluetooth® Device Address Remote devices return these addresses, uniquely assigned to each Bluetooth®

7 2D Code Handy Terminal 1.2 Components and Functions 1.2.1 BHT Front/Rear No. Name Function and Description (1) LCD

205 2D Code Handy Terminal 5.4 Basic Communication Specifications and Parameters 5.4.1 Basic Communication Specifications The table below lists the

206 BHT-825Q series  Transmission Code and Bit Order • All characters should be coded to 7 or 8-bit code for data transmission. • The standard cod

207 2D Code Handy Terminal 5.4.2 Communications Parameters In System Mode and user programs written in BHT-BASIC, you can set the communications para

208 BHT-825Q series

BHT-825Q series 6.1 Replacing the Battery Cartridge ······························································210 6.1.1 Bat

210 BHT-825Q series 6.1 Replacing the Battery Cartridge 6.1.1 Battery Cartridge Service Life The battery cartridge is a consumable part and should be

211 2D Code Handy Terminal 4. Insert the battery cartridge cover tab (1), and then close the battery cartridge cover (2) to lock the cover in positio

212 BHT-825Q series 6.2 Using the BHT after Long Periods Data stored in the BHT may be lost and the calendar clock may stop if the BHT is left unus

213 2D Code Handy Terminal 6.3 Daily Maintenance 6.3.1 Proper Care of the BHT Wipe any dirt from the BHT housing, charge terminals, and BHT or batte

214 BHT-825Q series

8 BHT-825Q series 1.2.2 Keypad The BHT key functions can be set at user programs. The diagram below shows an example of settings for each key functi

BHT-825Q series 07.1 System Errors ･････････････････････････････････････････････････ 216 17.2 System Mode Errors･････････････

216 BHT-825Q series 7.1 System Errors The error messages that display on the screen and the causes and countermeasures to be taken if an error occur

217 2D Code Handy Terminal Message BHT Response Cause Countermeasure The date and time settings screen displays, awaiting entry. The c

218 BHT-825Q series Message BHT Response Cause Countermeasure If this error occurs, the warning tone beeps five times. During executio

219 2D Code Handy Terminal Message BHT Response Cause Countermeasure After displaying this error message, the BHT may start a user pro

220 BHT-825Q series 7.2 System Mode Errors When error messages display while running System Mode, refer to the following table and take appropriate

221 2D Code Handy Terminal Message BHT Response Countermeasure The current download will exceed the maximum allowable number of files

222 BHT-825Q series Message BHT Response Countermeasure The memory is insufficient for setting up the BHT system parameter file or sy

BHT-825Q series 008.1 BHT-825Q series Specifications ·····························································55224 118.1.1

224 BHT-825Q series 8.1 BHT-825Q series Specifications 8.1.1 Hardware Specifications Power supply (main power): Rechargeable lithium-ion battery ca

9 2D Code Handy Terminal No. Key Name Function and Description (6) Numerical keys Used to enter data. (7) Enter key Press to finalize entered d

225 Barcode 8.1.2 Code Specifications Supported Code Types QR code (Model 1, Model 2), Micro QR code Code size Cell pitch QR code Max 117 cells x

226 BHT-825Q series COMPOSITE Read digits Module dimensions RSS, EAN128, Universal product codes, PDF417, Micro PDF, all codes within limits 0.2

227 Barcode QR code cell pitch dimensions and valid scanning range 8.1.3 Scanning Performance Scanning Reference Position As illustrated at left, a

228 BHT-825Q series QR code cell pitch dimensions Valid reading distance 0.20 mm 0.25 mm 0.33 mm 0.50 mm 45 to 95 mm *1 40 to 120 mm *1 3

229 Barcode 8.1.4 Interface Specifications IrDA Interface Specification: IrDA Ver1.3 Low Power physical layer compliant (Except transmission spe

230 BHT-825Q series

BHT-825Q series 00009.1 CU-800 Specifications·············································································777723

232 BHT-825Q series 9.1 CU-800 Specifications 9.1.1 Hardware Specifications CU-801 CU-811 CU-821 Power supply: 100/230 V AC (Using dedicated AC a

233 2D Code Handy Terminal 9.1.3 Interface Specifications CU-801 The CU-801 RS-232C interface connector uses Dsub-9P. Pin. No. Signal Name Funct

234 BHT-825Q series CU-811 The CU-811 has an IEEE802.3-compliant Ethernet interface port (100Base-TX). Ethernet Interface Port (RJ45 jack) on the

10 BHT-825Q series 1.2.3 BHT Screen If the system display is set to ON at the system settings or in the user program, icons display at the bottom of

235 2D Code Handy Terminal 9.2 When File Transfer is Not Possible Using the Transfer Utility This section describes the causes and remedies when file

236 BHT-825Q series Error No. Cause Details Remedy The Transfer Utility “Communication port” option specification is illegal. Specify the communica

237 2D Code Handy Terminal Error No. Cause Details Remedy An attempt was made to download a BHT-BASIC 3.6 format program file (*.PD3).Use BHT-BASIC

2D Code Handy Terminal BHT-825Q BHT-825QB BHT-825QW User’s Manual First Edition November 2011 DENSO WAVE INCORPORATED

BHT-825Q series 2.1 “BHT Preparation” Procedure ···································································12 2.2 Load

12 BHT-825Q series 2.1 “BHT Preparation” Procedure Follow the steps below to prepare the BHT for use. 2.2 Loading and Charging the Battery Cart

13 2D Code Handy Terminal Charging with the communication unit (CU-801, CU-811 and CU-821) or battery charger (CH-851 and CH-854) 1. Slide the bat

14 BHT-825Q series 4. Connect the dedicated AC adapter to the DC input connector on the charger and plug the adapter into the wall socket. The charge

ii 2D Code Handy Terminal Customer Registration and Inquiries Customer Registration To allow us to provide our customers with comprehensive service a

15 2D Code Handy Terminal Charging with the battery charger (CH-201A and CH-704) 1. Check the battery cartridge terminals and insert the cartridge

16 BHT-825Q series 5. Check the battery cartridge terminals and indication on the BHT unit, and then insert the cartridge in the direction indicated

17 2D Code Handy Terminal Mishandling of the charger may result in charger overheating, smoke generation, blowout orcombustion. Please read the foll

18 BHT-825Q series 2.2.1 Battery Power Level Indicator Confirming at the Power Level Icon The battery power level can be confirmed at the battery ic

19 2D Code Handy Terminal2.3 Attaching the Hand Strap Attach the hand strap to prevent the BHT from being accidentally dropped during use. 2.3.1 A

20 BHT-825Q series 2.4 Initial Setup Turn ON the power after inserting the fully charged battery cartridge into the BHT. The clock will not have bee

21 2D Code Handy Terminal2.5 Turning OFF the Power Use one of the following three methods to turn OFF the BHT power. Methods Operation Data Backup

22 BHT-825Q series 2.5.4 If the BHT Is Shut Down Abnormally If the BHT is shut down abnormally* and is left without a battery cartridge or with a di

23 2D Code Handy TerminalIf Scandisk finds a broken file(s), the right screen will appear. (As long as a broken file exits, the screen displays eve

24 BHT-825Q series About “$$BRKLST.SYS” If Scandisk finds a broken file(s), it will automatically create the "$$BRKLST.SYS" file. To chec

iii BHT-825Q series About this Manual • Due to improvements and so on, the content of this manual may be subject to change without prior notice. •

BHT-825Q series 03.1 Reading Barcodes or 2D Codes ·······························································926 13.2 Num

26 BHT-825Q series 3.1 Reading Barcodes or 2D Codes Follow the procedure below to scan barcodes. 1. Turn the BHT power ON. 2. Press the trig

27 2D Code Handy Terminal When unable to successfully read codes… Cause Countermeasure Specular reflection When the light is focused on the printed

28 BHT-825Q series 3.2 Numeric Data Entry Enter numeric data such as product volume with the numeric keys and Enter ( ) key. If numeric dat

29 2D Code Handy Terminal 3.4 Changing the Default Settings The volume, vibrator, LCD display brightness and power save settings can be changed at t

30 BHT-825Q series 2. Use the [▲] and [▼] cursor keys to select the item to be changed. The selected item is highlighted. 3. Use the [◄] an

31 2D Code Handy Terminal 3.5 Transmitting Data Data gathered by the BHT can be transmitted to the host computer by infrared communication, wireless

32 BHT-825Q series 3.5.1 Infrared Communication  When performing data communication between BHT units Point the BHT infrared communication ports tow

33 2D Code Handy Terminal 3.5.2 Wireless Communication Transmit data to host computer via the wireless LAN access point. To perform wireless communic

34 BHT-825Q series 3.5.3 Bluetooth® Communication This interface permits wireless communications with other Bluetooth® devices. Requ

iv 2D Code Handy Terminal Viewing this Manual − About the Bookmark The PDF Bookmark function can be used to jump to the Contents page. <Procedure

BHT-825Q series 4.1 Initializing the BHT System ·······································································36 4.1.1

36 BHT-825Q series 4.1 Initializing the BHT System By initializing the system, program files and data files downloaded to the BHT user area are dele

37 2D Code Handy Terminal4.1.1 Selecting the Memory Area to be Initialized 1. Press the Power key ( ) while holding down the SF, M1 and 0 keys to

38 BHT-825Q series 4.1.2 Selecting the Message Version (English or Japanese) 1. When the screen on the right displays, select the message display l

39 2D Code Handy Terminal4.1.4 Performing System Initialization 1. The screen on the right displays during system initialization. 2. Up

40 BHT-825Q series 4.2 Updating the System 4.2.1 Updating the BHT System The BHT system update procedure is as follows. BHT System Update File Down

41 2D Code Handy Terminal4.2.2 CU-811 System Update The CU-811 system update procedure is as follows. CU-811 System Update File Download ↓ CU-81

42 BHT-825Q series 4.3 Executing User Programs User programs (application programs) can be executed using the following methods. Select the most app

43 2D Code Handy TerminalSeveral directory management program examples are given below. The names of the files used in these examples are as follows.

44 BHT-825Q series  (Example 3) Recommended download method After system initialization, first download the program to be executed simply by pressin

v BHT-825Q series − Searching by Word The PDF search function can be used to jump to the target page by entering words or characters related to the i

45 2D Code Handy Terminal4.4 System Mode By starting up the BHT in System Mode and selecting each menu, the following operations can be performed in

46 BHT-825Q series 4.4.2 System Mode Basic Operation Menu Selection and Display Use the following procedure to select and display each menu. 1. Pre

47 2D Code Handy TerminalSetting Value Selection Use the following procedure to select setting values. 1. Press the numerical key corresponding to t

48 BHT-825Q series 4.4.3 SYSTEM MENU Configuration Menu Configuration for Items Displayed at the SYSTEM MENU Screen Select the item with the numeric

49 2D Code Handy Terminal Uploading Refer to section “4.5.4 Uploading Files”. System Environment Set

50 BHT-825Q series DEVICE MENU Refer to section “4.5.10 Wireless Communication Settings”.8 and ENT keys BS/C key

51 2D Code Handy TerminalMenu Configuration for Items Not Displayed at the SYSTEM MENU Screen Press the corresponding numerical key while holding dow

52 BHT-825Q series 4 with SF held down 6 with SF held down Dot [.] with SF held down BS/C key Setting

53 2D Code Handy Terminal4.5 SYSTEM MENU 4.5.1 Executing Setup (SETUP Menu) The BHT setup can be effectively executed using the BHT Setting and clone

54 BHT-825Q series 2. Execute the master-side setup. Setup is performed with the BHT Setting and other SYSTEM MENU functions. 3. Perform the settin

vi 2D Code Handy Terminal Related Documentation • BHT-BASIC Programmer’s Manual (BHT-800 Series) This is an instruction manual used to create handy

55 2D Code Handy Terminal6. Align the BHTs as shown below, and then press ENT on the transmitting device. The data transmission progress stat

56 BHT-825Q series When communication is complete, the screen will return to the CLONE MENU (the previous screen.) In the event of a communication er

57 2D Code Handy Terminal4.5.2 Executing User Programs (EXECUTE PROGRAM Menu) Individually select and execute user programs downloaded to the BHT.

58 BHT-825Q series 4.5.3 Downloading Files (DOWNLOAD Menu) Download files to the BHT user area from other devices such as the host computer. - Poi

59 2D Code Handy Terminal2. Select either “1: FILE” or ”2: HT<-->HT COPY” and press the ENT key. The screen on the right displays indicating t

60 BHT-825Q series 5. When downloading is complete, the speaker sounds once and the screen on the right displays. When the number of received record

61 2D Code Handy Terminal4.5.4 Uploading Files (UPLOAD Menu) Upload files stored in the BHT user area to another device. Use the following procedur

62 BHT-825Q series 2. Select “1: FILE”, ”2: ALL FILES” or ”3: HT<-->HT COPY” and press the ENT key. When “1: FILE” is selected: The screen on

63 2D Code Handy Terminal4. By executing the BHT-BASIC 4.0 Transfer Utility or similar program, the screen on the right displays and file uploading

64 BHT-825Q series 4.5.5 Copying Files between 2 BHT Units Copy “all files (excluding font files)”, “setting data”, and the “date and time” stored i

vii BHT-825Q series SAFETY PRECAUTIONS Be sure to observe all these safety precautions.  Please READ through this manual carefully. It will enable y

65 2D Code Handy Terminal - Note - The following setting data is copied when copying between BHT units. LCD contrast level Volume Switching between

66 BHT-825Q series FTP option, Line delimiters (CR/LF) FTP option, Handling of line delimiters FTP option, Handling of trailing spaces in data field

67 2D Code Handy Terminal4.5.6 System Environment Settings (SET SYSTEM Menu) Use the following procedure to set the system environment. 1. Select “4

68 BHT-825Q series [1] Setting the auto-start execution program Use the following procedure to set the auto-start execution program. 1. Select “1:

69 2D Code Handy Terminal[2] Setting the message version, system status indication and screen display compatible mode Use the following procedure to

70 BHT-825Q series 3. Simultaneously press the SF key and “1: MESSAGE” at the SET DISPLAY menu. The SET DISPLAY menu on the right displays. The high

71 2D Code Handy Terminal BHT-825Q series BHT-300 Mode BHT-7500 Mode BHT-100 Mode Normal Mode Standard font 22 x 16 char. (10 x 20 dots) 26 x 26 ch

72 BHT-825Q series  System Status Indication Turning ON the system status indication displays the following icons at the bottom of the screen. Ind

73 2D Code Handy Terminal[4] Setting the code scanning parameters Use the following procedure to set the code scanning conditions. 1. Select “4: QR

74 BHT-825Q series  “3: DECODE LEVEL” Set the decode level (code reading tolerance level). Press [] to decrease the setting value and [ ] to incr

viii 2D Code Handy Terminal Handling the battery cartridge • Never disassemble or heat the battery cartridge, nor put it into fire or water; doing s

75 2D Code Handy Terminal・Data Matrix N+1 N+2 N+3 N+4 N+5 N+6 N+7 N+8 N+9 N+10 N+111 2 3 N—1 N“Z”Model Error-correcting level Longitudi

76 BHT-825Q series  “2: DEVICE SETTINGS”: Device settings during reading 1. Use the cursor keys ([▲] [▼]) or numerical keys ([1] [2] [3]) to high

77 2D Code Handy Terminal  “3: OPEN BAR SEETTINGS”: Setting “The FUNCTION TO ASSIGN SCAN SETTINGS WITH THE SYSTEM SETTINGS” 1. Select “3:OPEN BAR

78 BHT-825Q series 2. Use the cursor keys ([▲] [▼]) or numerical keys ([1] [2] [3] [4]) to select the item to be set and press the ENT key. 3. Pres

79 2D Code Handy Terminal[3] Read code 1. Select “3: READ CODE” at OPEN BAR SETTING and then press the ENT key. SET READ CODE screen displays. “

80 BHT-825Q series Press ENT key for the detailed settings of the bar code beign selected. Refer to the following section for the details. Press the

81 2D Code Handy Terminal“1:EAN/UPC”：Detailed settings for EAN/UPC 1. Select “1: EAN/UPC” at SET BARCODE menu and then press the ENT key. SET EAN/UP

82 BHT-825Q series 2. Use the cursor keys ([▲] [▼]) or numerical keys ([1] [2] [3] [4]) to select the item to be set and press the ENT key. 3. Use

83 2D Code Handy Terminal“3:CODABAR”：Detailed settings for Codabar (NW-7) 1. Select “3: CODABAR” at SET BARCODE menu and then press the ENT key. SE

84 BHT-825Q series “4:CODE39”：Detailed settings for Code 39 1. Select “4: CODE39” at SET BARCODE menu and then press the ENT key. SET CODE39 scree