Denso BHT-825QW Manual de usuario descargar pdf (Pagina 183)

168

BHT-825Q series

[2] Setting up the Bluetooth® parameter

1. Select “2: SET BLUETOOTH” in the BLUETOOTH MENU and

then press the ENT key.

The SET BLUETOOTH menu is desplayed.

[1: DEVICE]: Sets up the device.

[2: INQUIRY]: Sets up the device detection.

[3: MASTER]: Sets up the master station.

[4: SLAVE]: Sets up the slave station.

[5: SPP PARAMETER]: Sets up the protocol options for transferring files

via the serial port profile.

Refer to the following sections for each of the above menus.

Press the Backspace/clear key to return to the BLUETOOTH MENU.

 Setting up the device name

1. Select “1: DEVICE” in the SET BLUETOOTH menu and then press

the ENT key.

The current setting is displayed.

[1: DEVICE NAME]: Sets up the Bluetooth

device name.

Press the Backspace/clear key to return to the SET BLUETOOTH menu.

2. Press the ENT key.

Entry mode is activated and the cursor is displayed.

3. Use the numeric keys and the dot key to enter the Bluetooth

device

name.

The Bluetooth

device name can be up to 16 characters long. The default setting is DENSO-BHT.

To swicth the entry mode (between numeric and alphabet entries), press the SF key.

Refer to “Chapter 5 Communication” – “5.3 Bluetooth

wireless communications” for the Bluetooth

device

name.

To delete a single character, press the Backspace/clear key. To delete the entire entry, press and hold

the Backspace/clear key or press the SF and Backspace/clear keys simultaneously.

4. Press the ENT key.

5. Press the Backspace/clear key to return to the SET BLUETOOTH menu.

1 2 ... 178 179 180 181 182 183 184 185 186 187 188 ... 252 253

Sin comentarios

Denso BHT-825QW Manual de usuario Pagina 183