Denso BHT-825QW Manual de usuario descargar pdf (Pagina 153)

138

BHT-825Q series

 “2: SET PING” (PING Options Setting Screen)

1. Select “2: SET PING” at the TEST PING menu and then press the

ENT key.

The current settings are displayed.

[1: DESTINATION IP]:

Specifies the IP address of the host computer to be pinged.

[2:DATA SIZE]:

Specifies the data size of the echo request.

[3:INTERVAL]:

Specifies the echo request interval (in units of 100 ms).

[4:TIMEOUT]:

Specifies the timeout period (in units of 100 ms) for the echo request.

[5:COUNT]:

Specifies the number of echo requests to be sent.

[6:SEND TYPE]:

Selects the echo request send timing (TYPE 1 or TYPE 2).

(Refer to “PING Echo Request Transmission Timing (SEND TYPE)” on the following page for details.)

2. Use the cursor keys ([▲] [▼]) or numerical keys ([1] [2] [3] [4] [5] [6]) to highlight the item to be

set, and then press the ENT key.

The mode changes to entry mode and the cursor displays.

Use the cursor keys ([◄] [►]) to highlight the “6: SEND TYPE” setting.

3. Enter the setting values with the numerical keys and dot key.

To delete a single character, press the BS/C key. To delete the entire entry,

press and hold the BS/C key, or press the SF key and BS/C key simultaneously.

4. Enter the setting values and then press the ENT key.

Press the BS/C key to return to the TEST PING menu.

Entry Range for DATA SIZE, INTERVAL, TIMEOUT, and COUNT

Item Allowable Entry range Default

DATA SIZE 4 to 1472 56

INTERVAL 0 to 65535 10

TIMEOUT 0 to 65535 10

COUNT 0* to 65535 4

* Specifying zero (0) will set the number of echo requests to “infinite,” meaning that echo requests will be

sent continuously until the PING test is aborted.

If a value outside the allowable entry range listed above is specified, the nearest value within the range

will automatically be applied.

1 2 ... 148 149 150 151 152 153 154 155 156 157 158 ... 252 253

Sin comentarios

Denso BHT-825QW Manual de usuario Pagina 153