Denso Power Net Terminal BHT-7500 Especificaciones descargar pdf (Pagina 509)

500

An 8-bit binary pattern (bits 7 to 0) on the input ports (which read VRAM) 10h to 40Fh in the

BHT-7000 or 10h to C8Fh in the BHT-7500 represents a basic dot pattern column of the

LCD. Bit value 1 means a black dot. The port number gives the dot column address.

On input ports BE0h to C8Fh, which represents the bottom line of the LCD, is a 7-bit binary

pattern (bits 6 to 0) only. If "1" is set to bit 7 for output, bit 7 returns "1"; if "0," bit 7 returns

"0."

A user program returns the A/D converted value (0 to 255) of the battery voltage level (0 to

7V). The returned value is an instantaneous value when data on the input port is read. The

voltage level varies depending upon the BHT-7000/BHT-7500 operation and it is not in pro-

portion to the battery capacity, so use this voltage level as a reference value.

*10

If the BHT is placed on the CU and is ready to be charged (or being charged), "1" will be

returned. In this condition, the indicator LED on the BHT is lit in red or green showing the

charging state.

In either of the following cases, "0" will be returned even if the BHT is placed on the CU:

- No power is supplied to the CU.

- The BHT cannot be recognized as being placed on the CU due to contact failure of charg-

ing terminals.

*11

A user program returns the communications protocol type used for file transmission with

the

XFILE statement. For details about the communications protocol, refer to the "BHT-

7000 User’s Manual" or "BHT-7500 User’s Manual."

*12

A user program returns the BHT’s ID number which is required for the use of the BHT-Ir

protocol. The ID number is expressed by two bytes: lower byte on port 6061h and upper

byte on port 6062h. The range of the returned value is from 1 to FFFFh. If the ID number

is 1234h, for example, the value on 6061h is 34h and that on 6062h is 12h.

*13

Fixed to 3/16 bit time.

*14

If the value of this bit is 0 (standard-size), characters will be displayed as follows:

If the value of this bit is 1 (small-size), characters will be displayed as follows:

*15

Valid only in the BHT-7000 with 26-key pad.

*16

A user program returns the beeper volume level--1 (Low), 2 (Medium), or 3 (High). 0

means no beeping.

(W) x (H)

Single-byte ANK mode 6 dots x 8 dots

Two-byte Kanji mode Full-width

Half-width

16 dots x 16 dots

8 dots x 16 dots

(W) x (H)

Single-byte ANK mode 6 dots x 6 dots

Two-byte Kanji mode Full-width

Half-width

12 dots x 12 dots

6 dots x 12 dots

1 2 ... 504 505 506 507 508 509 510 511 512 513 514 ... 559 560

Comentarios a estos manuales

Sin comentarios

Denso Power Net Terminal BHT-7500 Especificaciones Pagina 509

Comentarios a estos manuales

Relacionado con productos y manuales para Lectores De Códigos De Barras Denso Power Net Terminal BHT-7500