Denso BHT-200QW Especificaciones Pagina 151

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 166
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 150
138
[ 2 ] Interface Cable Connection
CU-201
As illustrated below, connect the CU-201 (on which the BHT is put) to a host PC with a cross-mode cable.
To connect it to a modem, use a straight-mode cable.
Cable Connection between CU-201 and Host PC
Cable Connection between CU-201 and Modem
DTE and DCE
In the RS-232C interface specifications, the DTEs (Data Terminal Endpoint) shall be generally
connected with each other by a cross-mode cable; the DTE and DCE (Data Circuit Endpoint) shall be
connected with each other by a straight-mode cable.
The DTE is one piece of equipment connected at both ends of a communications line as a sender or
receiver of data (such as CU-201 on which the BHT is put and a host PC).
The DCE is one piece of equipment connected in-between the DTE and the communications line and
terminates communications lines. It converts their signals without any change in contents (such as
modem or TA).
CU-221
Use a cable that conforms to the USB specification.
CU-201
(DTE)
CU-201
(DTE)
Host PC
(DTE)
Vista de pagina 150
1 2 ... 146 147 148 149 150 151 152 153 154 155 156 ... 165 166

Comentarios a estos manuales

Sin comentarios