Denso BHT-200QW Especificaciones Pagina 145

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 166
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 144
132
5.4 Communicating with the Host PC
5.4.1 Setting the Transmission Speed of the CU-200
CU-201: Set the transmission speed to the same value as that of the BHT and host PC, by using the DIP
switch.
CU-221: The transmission speed is automatically determined by the host PC.
The DIP switch is located next to the power inlet connector on the side of the CU-201.
(1) Remove the protection sheet of the DIP switch from the CU-201.
(2) Set the selectors of the DIP switch as shown below.
(3) Reinstall the protection sheet.
Do not set the DIP switch to any configurations other than one of the five shown above.
When removing the protection sheet, take care not to let any foreign material get into the CU.
Vista de pagina 144
1 2 ... 140 141 142 143 144 145 146 147 148 149 150 ... 165 166

Comentarios a estos manuales

Sin comentarios