Denso BHT-202Q Manual de usuario descargar pdf (Pagina 124)

110

BHT-904B/BHT-914B

[7] Communication test

Use the following procedure to perform a communication test.

1. Select “7: COMMUNICATION” at the TEST menu and then pr

the ENT key.

right.

Refer to the following section for details of the above items.

Press the Backspace/clear key to return to the TEST menu.

 Infrared Communication Test

1. Arrange two BHTs, one as a master station and the other as a

their IrDA interface ports facing each other as illustrated below.

This test involves transmitting data from the test BHT and the master BHT returnin

BHT.

2. Select “1: OPTICAL” at the TEST COMMUNICATION menu and

then press the ENT key.

The TEST COMMUNICATION screen displays as shown on the right.

ess

slave station (to be tested) with

g the data to the test

The TEST COMMUNICATION screen displays as shown on the

“1: OPTICAL”: Performs an infrared communication test.

ion test. “2: CONNECTOR”: Performs the USB connect

Master BHT

Slave BHT

(

to be tested

)

Data

Max. 15 cm

1 2 ... 119 120 121 122 123 124 125 126 127 128 129 ... 197 198

Sin comentarios

Denso BHT-202Q Manual de usuario Pagina 124