Denso 400BW-CE Especificaciones descargar pdf (Pagina 39)

▪ POWER

Set the power mode for the wireless module built in the BHT. The following two power modes are

available. The default is P_PWRSAVE_PSP.

The set value is validated when the wireless LAN device is opened first after setting.

Power mode Power consuming state

P_PWRSAVE_CAM Consumes much power (no power saving effect)

P_PWRSAVE_PSP

Consumes less power (much power saving effect).

The BHT may take more time to establish the wireless link or send

response messages.

[Ex.] Set the power mode to "Cosumes much power"

DWORD dwVal = P_PWRSAVE_CAM;

BHT_RF_SetParamInt (P_INT_POWERSAVE, &dwVal, sizeof(dwVal));

▪ RADIO MODE

The standard for the wireles LAN being used can be set. The following 3 patterns are available, with

the default set to 802.11b.

The set value is validated when the wireless LAN device is opened first after setting.

Radio mode State

P_RADIOMODE_11A Operates on wireless LAN standard 802.11a.

P_RADIOMODE_11B Operates on wireless LAN standard 802.11b.

P_RADIOMODE_11B |

P_RADIOMODE_11G

Operates on wireless LAN standard 802.11b and 802.11g.

[Ex.] To set the radio mode to “802.11b/g”:

DWORD dwVal = P_RADIOMODE_11B | P_RADIOMODE_11G;

BHT_RF_SetParamInt (P_INT_RADIOMODE, &dwVal, sizeof(dwVal));

▪ ESSID

Specify an ID that identifies the wireless network as a character string. The ESSID of the BHT should

be the same as the SSID of the access point. If the ESSID is not set correctly, no communication is

possible.

[Ex.] Set the "BHT700" to the ESSID (The infrastructure mode is assumed to be an “Infrastructure.”)

ST_RF_PROFILE_KEY stKey;

wcscpy(&stKey.szESSID[0], TEXT(“BHT700”)); // ESSID

stKey.dwInfraMode = INFRA_INFRASTRUCTURE; // Infrastructure

BHT_RF_IoControl (RF_SET_PROFILE, (LPVOID)&stKey, sizeof(stKey), NULL, 0, NULL);

▪ ENCRYPTION

This is the encryption method setting. A selection can be made from Prohibited, WEP, TKIP and AES.

▪ AUTHENTICATION

This is the authentication method setting. A selection can be made from Open, Shared, WPA, WPA-

PSK, WPA2, and WPA2-PSK.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 175 176

Sin comentarios

Denso 400BW-CE Especificaciones Pagina 39